✦ LIBER ✦

Studying the properties of heat-resistant coatings on metal applied by gas flame

✍ Scribed by L. D. Svirskii; Yu. A. Pirogov

Publisher: Springer US
Year: 1964
Tongue: English
Weight: 760 KB
Volume: 21
Category: Article
ISSN: 0361-7610
DOI: 10.1007/bf00682637

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Study of the flame in glass furnaces hea

Study of the flame in glass furnaces heated by natural gas

✍ V. P. Kononko; O. L. Mazaeva 📂 Article 📅 1974 🏛 Springer US 🌐 English ⚖ 248 KB

Effects of Ni and TiN Coatings on the Al

Effects of Ni and TiN Coatings on the Alumina/Heat-Resistant Steel Interface Properties

✍ Enze Wang; Yong Yi; Hua Xie; Yongge Fan 📂 Article 📅 2005 🏛 Springer Netherlands 🌐 English ⚖ 262 KB

The electrical resistivity of aluminum o

The electrical resistivity of aluminum oxide applied to a backing by plasma and gas-flame deposition

✍ V. Smirnov; E. E. Shklyarevskii 📂 Article 📅 1969 🏛 Springer US 🌐 English ⚖ 226 KB

Effect of disperse polyethylene fillers

Effect of disperse polyethylene fillers on the physicomechanical properties of coatings prepared by gas-flame and electric arc methods

✍ A. Z. Skorokhod; O. R. Yurkevich 📂 Article 📅 1994 🏛 Springer US 🌐 English ⚖ 360 KB

Phase composition of the diffusion layer

Phase composition of the diffusion layers of metallic coatings on heat-resistant nickel alloys

✍ E. N. Kablov; G. I. Morozova; G. N. Matveeva; S. A. Budinovskii 📂 Article 📅 1994 🏛 Springer US 🌐 English ⚖ 303 KB

Effect of heat-treatment on the performa

Effect of heat-treatment on the performance of gas barrier layers applied by atomic layer deposition onto polymer-coated paperboard

✍ Terhi Hirvikorpi; Mika Vähä-Nissi; Jari Vartiainen; Paavo Penttilä; Juha Nikkola 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 428 KB 👁 2 views

## Abstract The effect of heat treatment on the gas barrier of the polymer‐coated board further coated with an Al~2~O~3~ layer by atomic layer deposition (ALD) was studied. Heat treatment below the melting point of the polymer followed by quenching at room temperature was used for the polylactide‐c