✦ LIBER ✦

Study on precipitation and transition mechanisms from the magnetic properties of silicon steel during annealing

✍ Scribed by Fan, Yong-fei; Yu, Hao; Sun, Jing; Tao, Pan; Song, Cheng-hao; Zeng, Xun

Book ID: 125382016
Publisher: Springer-Verlag
Year: 2014
Tongue: English
Weight: 488 KB
Volume: 21
Category: Article
ISSN: 1674-4799
DOI: 10.1007/s12613-014-0919-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of annealing temperature and heat

Effect of annealing temperature and heating rate on the magnetic and mechanical properties of electrical steel

✍ X. Duan; H. Huneus; T. Kochmann; K. Leuridan; R. Kaczmarek; F. Protat 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 176 KB

The effects of stress relief annealing o

The effects of stress relief annealing on the magnetic properties of cut laminations and assembled cores produced from nonoriented electrical steel

✍ Hancock, R.G. 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 215 KB

Study of vacuum levels in the annealing

Study of vacuum levels in the annealing of high silicon (6.4 wt%) non-oriented magnetic steel sheets obtained by rapid quenching and its incidence on grain size, texture and core losses

✍ I. Ibarrondo; J. Degauque 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 90 KB

In the present study, high silicon (6.4 wt%) -iron microcrystalline ribbons (25 mm;38 m) were obtained directly from its melted state by rapid quenching. The material thus obtained was then submitted to heat treatment. This soft magnetic material is mainly used as cores in high-performance electric

Effect of semifinished rolled product co

Effect of semifinished rolled product cooling rate during controlled rolling on the condition of microalloyed steel hot-worked austenite, final microstructure, and mechanical properties. Part 1. Study of the Effect of Semifinished Rolled Product Cooling Rate on Ferrite-Pearlite Microstructure Formation

✍ Yu. D. Morozov; I. F. Pemov; E. A. Goli-Oglu; D. V. Nizhelsky 📂 Article 📅 2012 🏛 Springer US 🌐 English ⚖ 636 KB

Effect of semifinished rolled product co

Effect of semifinished rolled product cooling rate during controlled rolling on the condition of microalloyed steel hot-worked austenite, final microstructure, and mechanical properties. Part 2. Study of the effect of semifinished rolled product cooling rate on ferrite-bainite structure formation*

✍ Yu. D. Morozov, I. F. Pemov, E. A. Goli-Oglu, D. V. Nizhelsky 📂 Article 📅 2012 🏛 Springer US 🌐 English ⚖ 517 KB