✦ LIBER ✦

Study on growth factors of intermetallic layer within hot-dipped 25% Al-Zn alloy coating on steel

✍ Scribed by Yan Li; Ying Ma; Baorong Hou; Falun Feng; Xujun Wei

Book ID: 110641498
Publisher: Springer-Verlag
Year: 2001
Tongue: English
Weight: 333 KB
Volume: 24
Category: Article
ISSN: 0250-4707
DOI: 10.1007/bf02704926

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Morphology and properties of hot dip Zn–

Morphology and properties of hot dip Zn–Mg and Zn–Mg–Al alloy coatings on steel sheet

✍ Monojit Dutta; Arup Kumar Halder; Shiv Brat Singh 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 1021 KB

Development of hard intermetallic coatin

Development of hard intermetallic coatings on austenitic stainless steel by hot dipping in an Al–Si alloy

✍ E. Frutos; J.L. González–Carrasco; C. Capdevila; J.A. Jiménez; Y. Houbaert 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 608 KB

XPS study of the surface chemistry of co

XPS study of the surface chemistry of conventional hot-dip galvanised pure Zn, galvanneal and Zn–Al alloy coatings on steel

✍ S Feliu Jr.; V Barranco 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 252 KB

The role of Si and Ti additions on the f

The role of Si and Ti additions on the formation of the alloy layer at the interface of hot-dip Al–Zn coatings on steel strips

✍ F. García; A. Salinas; E. Nava 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 280 KB

Corrosion behaviour and biocompatibility

Corrosion behaviour and biocompatibility of a novel Ni-free intermetallic coating growth on austenitic steel by hot dipping in an Al–12.6%Si alloy

✍ M. A. Arenas; E. Frutos; L. Saldaña; A. Conde; L. Labajos-Broncano; M. L. Gonzál 📂 Article 📅 2011 🏛 Springer 🌐 English ⚖ 754 KB

Electrochemical methods study on corrosi

Electrochemical methods study on corrosion of 5% Al–Zn alloy-coated steel under thin electrolyte layers

✍ S. Xing; Y. Li; J. Wu; Y. Yan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 234 KB

## Abstract The corrosion behavior of a 5% Al–Zn alloy (GF) coated steel was investigated under cyclic wet–dry condition using electrochemical techniques. The wet–dry cycle was conducted by exposure to alternate condition of 1 h immersion in seawater and 7 h drying at ambient temperature. The polar