Based on polyoxyethylated amines ( M n Γ 600, 1,200) derived from n-butyl amine and ethylene oxide, 4,4 -diphenylmethane diisocyanate, and different chain extenders, two series of polyether-polyurethane (PU) ionomers with reasonable mechanical properties were synthesized. Chain-extended by 1,4-butan
Study of the synthesis and physical properties of fire-resistant polyurethane ionomers
β Scribed by D. Y. Chao; W. J. Kuo; N. H. Wang; C. L. Lee; K. H. Yang
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 191 KB
- Volume
- 67
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
Fire-resistant polyurethane ionomers successfully synthesized at our laboratory have been proved by infrared spectra. In aqueous solution, the surface tension for fire-resistant polyurethane ionomers made by toluene diisocyanate or isophorone diisocyanate was found to decrease substantially with increasing concentration of 1,4bis(2-hydroxyethyl)piperazine but to increase gradually with increasing phenylphosphonic acid or 1,4-bis(2-hydroxyethyl)piperazine with the phenylphosphonic acid concentration used to prepare these ionomers. For 1,4-bis(2-hydroxyethyl)piperazinebased polyurethane ionomers made by toluene diisocyanate or isophorone diisocyanate in aqueous solution, the number-average particle sizes of these ionomers decrease drastically with increasing 1,4-bis(2-hydroxyethyl)piperazine concentration, as a result of intramolecular interaction. On the other hand, for both phenylphosphonic acid and 1,4-bis(2-hydroxyethyl)piperazine with phenylphosphonic acid-based polyurethane ionomers, their average particle size increased with increasing phenylphosphonic acid or 1,4-bis(2-hydroxyethyl)piperazine with phenylphosphonic acid concentration. This may be attributed to the results of intermolecular interaction. Obviously, the limiting oxygen index values are seen to be higher for the isophorone diisocyanate type than for the toluene diisocyanate type of fire-resistant polyurethane ionomer. In fact, our experimental results suggest that the isophorone diisocyanate types of fire-resistant polyurethane ionomers provide good fire-resistance. For self-cured films of fire-resistant polyurethane ionomers, the tensile strength at breaking point increases with increasing the concentration of fire retardants, but the elongation at breaking point for these ionomers, on the other hand, appears to decrease with increasing concentration of fire retardants.
π SIMILAR VOLUMES
Polycaprolactone containing carboxyl groups (CPCL, M n Ο 1200) was prepared from caprolactone (CL) and dimethylol propionic acid (DMPA). Based on the CPCL, 4,4Π-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (BD), a novel series of polyurethane ionomers could be synthesized with ions in the s
## Abstract In this article, thermoplastic polyurethane (PU) with a shape memory property was synthesized. First, the PU prepolymer was prepared by reacting poly(tetramethylene glycol) with 4,4β²βdiphenylmethane diisocyanate, then extended with various extenders such as linear aliphatic 1,4βbutanedi
## SYNOPSIS A series of polyether (PTMO, PEO) polyurethane ionomers having different contents of sodium sulfonate groups in the soft segments have been synthesized. The reaction of transesterification was involved in the incorporation of the sodium sulfonate groups in the polyether. The polyuretha
## Abstract New bifunctional triazene compounds 1β(__m__β hydroxymethyl)phenylβ3β(2βhydroxyethyl)β3βmethyltriaz(1)ene and lβ__p__βnitrophenylβ3,3βdi(2βhydroxyethyl)triaz(1)ene as intermediates in polyurethane synthesis were prepared. Photosensitive polyetherurethane cationomers based on poly(tetram