## Abstract The zoneβdrawing method has been applied to prepare ultraβhigh modulus polyvinyl alcohol fibers. First, the suitable temperature for zoneβdrawing was decided. In the first zone drawing, when drawing temperature was as high as near melting point, the highest draw ratio and modulus were o
Study of the production of ultra-high modulus polyoxymethylene by tensile drawing at high temperatures
β Scribed by B. Brew; I.M. Ward
- Publisher
- Elsevier Science
- Year
- 1978
- Tongue
- English
- Weight
- 551 KB
- Volume
- 19
- Category
- Article
- ISSN
- 0032-3861
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Introduction draw PTFE extrudates above their static T m , draw was not attainable, since they fractured on heating above the T m or at a low strain on tensile draw in an air oven, Nascent poly(tetrafluoroethylene) (PTFE) reactor due to the melting combined with shrinkage force. powder has been
## Abstract In the present study, a series of Irβbased catalysts, supported on Al~2~O~3~, ZrO~2~, CeO~2~, and Ce~x~Zr~1βx~O~2~, are investigated for the production of hydrogen by the high temperature steam reforming of methanol (SRM). Results show that CeO~2~ and Ce~x~Zr~1βx~O~2~ can promote the CO
## Abstract Atomic resonance absorption spectroscopy has been used to investigate the thermal decomposition of N~2~O by monitoring the formation of O atoms behind reflected shock waves in the temperature range 1490β2490 K and at total pressures from 58 to 347 kPa, by using the mixtures of N~2~O hig