Performance characteristics of a microstrip gas counter operated as an x-ray รuorescence spectrometer are reported. Gas ampliรcation as a function of microstrip anode-cathode voltage was measured, and the breakdown threshold voltage was determined in pure xenon. The detector temporal stability and t
Study of the monolithic x-ray focusing lens and its application in microbeam x-ray fluorescence analysis
โ Scribed by Jindong Xie; Yiming Yan; Xunliang Ding; Yejun He; Qiuli Pan
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 111 KB
- Volume
- 29
- Category
- Article
- ISSN
- 0049-8246
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The model parameters in artiรcial neural networks have a great inรuence on the training speed. It can be increased after choosing the optimum parameters, which was performed by a stepping technique. The training speed using the method is usually faster than that when adopting random or empirical par
In the framework of a large research programme on air quality in northern Italy managed by the Institute of General and Applied Physics (IFGA), an extensive investigation of air particle pollution was performed. Aerosol sampling campaigns were carried out in areas of di โ erent typology in the Po Val
An empirical method is proposed for the correction of spectral interference between characteristic lines in XRF. The procedure is based on a coefficient which includes instrumental parameters and atomic properties and is obtained with the same standards as those used in calibration. This method has
An algorithm of single component prediction based on backward error propagation is proposed, in which only one component concentration in a multivariate system is predicted each time. The algorithm was compared with a multiple component prediction model. In general, the predictive accuracy of the si
Energy-dispersive x-ray fluorescence (EDXRF) spectrometry was used for the analysis of silicate rocks using pressed powder pellets. It is observed that with this low-cost, simple and fast technique, trace elements such as V, Cr, Co, Ni, Cu, Zn, Ga, Pb, Th, Rb, Sr, U, Y, Zr and Nb can be determined a