Study of the microstructure resulting from brazed aluminium materials used in heat exchangers
✍ Scribed by J. Lacaze; S. Tierce; M.-C. Lafont; Y. Thebault; N. Pébère; G. Mankowski; C. Blanc; H. Robidou; D. Vaumousse; D. Daloz
- Publisher
- Elsevier Science
- Year
- 2005
- Tongue
- English
- Weight
- 380 KB
- Volume
- 413-414
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
✦ Synopsis
Re-solidification of AA4343 cladding after brazing as well as the related precipitation in the modified AA3003 core material have been investigated. Analysis of the re-solidified material showed that partial dissolution of the core alloy occurs in both the brazing joints and away of them. Far from the brazing joints, the dissolution is, however, limited and diffusion of silicon from the liquid into the core material leads to solid-state precipitation in the so-called "band of dense precipitates" (BDP). On the contrary, the dissolution is enhanced in the brazing joint to such an extent that no BDP could be observed. The intermetallic phases present in the re-solidified areas as well as in the core material have been analyzed and found to be mainly cubic alpha-Al(Mn,Fe)Si. These results were then compared to predictions made with available phase diagram information.
📜 SIMILAR VOLUMES
## Abstract ## Background The aging of the population has become a worldwide phenomenon. This leads to increased demand for services and with limited resources it is important to find a way to estimate how resources can be match to those with greatest need. ## Aims To analyse time use and costs
## Abstract Large losses of onion flavour components result from certain post‐harvest processes such as cooking by boiling, dehydration, freezing etc. The mechanisms by which these losses occur have been investigated on the basis of the alliinase‐precursor system and shown to include: (a) complete