𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Study of the distribution of air flow in a proton exchange membrane fuel cell stack

✍ Scribed by Radu Mustata; Luis Valiño; Félix Barreras; María Isabel Gil; Antonio Lozano


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
914 KB
Volume
192
Category
Article
ISSN
0378-7753

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Behavior of a unit proton exchange membr
✍ Dong Liang; Meiling Dou; Ming Hou; Qiang Shen; Zhigang Shao; Baolian Yi 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 665 KB

Durability is an important issue in proton exchange membrane fuel cells (PEMFCs) currently. Fuel starvation could be one of the reasons for PEMFC degradation. In this research, the fuel starvation conditions of a unit cell in a stack are simulated experimentally. Cell voltage, current distribution a

Study of sulfur dioxide crossover in pro
✍ Junxiang Zhai; Ming Hou; Huabing Zhang; Zhimin Zhou; Jie Fu; Zhigang Shao; Baoli 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 1010 KB

As one of the most deleterious impurities to proton exchange membrane fuel cells (PEMFCs), sulfur dioxide (SO 2 ) in air can pass through the membrane from the cathode to the anode and poison the catalyst of the two electrodes. The phenomenon of SO 2 crossover is investigated electrochemically in th

Thermal management of a proton exchange
✍ Chih-Yung Wen; Yu-Sheng Lin; Chien-Heng Lu; Tei-Wei Luo 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 876 KB

This work characterizes the thermal management of a proton exchange membrane fuel cell (PEMFC) stack with combined passive and active cooling. A 10-cell PEMFC stack with an active area of 100 cm 2 for each cell is constructed. Six thermally conductive 0.1-mm-thick Pyrolytic Graphite Sheets (PGSs) ar

Passive water management at the cathode
✍ T. Fabian; R. O’Hayre; S. Litster; F.B. Prinz; J.G. Santiago 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 687 KB

Water management is a significant challenge in portable polymer electrolyte membrane (PEM) fuel cells and particularly in proton exchange membrane (PEM) fuel cells with air-breathing cathodes. Liquid water condensation and accumulation at the cathode surface is unavoidable in a passive design operat