✦ LIBER ✦

Study of correlation between fractal dimension and impact energy in a high strength low alloy steel

✍ Scribed by Ray, K.K.; Mandal, G.

Book ID: 121996404
Publisher: Elsevier Science
Year: 1992
Weight: 551 KB
Volume: 40
Category: Article
ISSN: 0956-7151
DOI: 10.1016/0956-7151(92)90394-T

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A study on fractal dimension of fracture

A study on fractal dimension of fracture surface created by stress corrosion cracking in high strength steels

✍ Chen, Jun; Chen, Jizhi; Mu, Z.Q.; Lung, C.W.; Long, Q.Y. 📂 Article 📅 1992 🏛 Elsevier Science ⚖ 401 KB

Variability in the mechanical properties

Variability in the mechanical properties and processing conditions of a High Strength Low Alloy steel

✍ G.W. Bright; J.I. Kennedy; F. Robinson; M. Evans; M.T. Whittaker; J. Sullivan; Y 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 658 KB

Variability in the mechanical properties of steel strip has a significant effect on the structural performance of manufactured components. This study provides a statistical analysis of the variability in yield strength, Ultimate Tensile Strength (UTS) and elongation to failure by examining the chemi

Relationship Between Solidification Micr

Relationship Between Solidification Microstructure and Hot Cracking Susceptibility for Continuous Casting of Low-Carbon and High-Strength Low-Alloyed Steels: A Phase-Field Study

✍ BÃ¶ttger, B.; Apel, M.; Santillana, B.; Eskin, D. G. 📂 Article 📅 2013 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 967 KB

Cyclic plastic strain energy as a damage

Cyclic plastic strain energy as a damage criterion and environmental effect in Nb-bearing high strength, low alloy steel

✍ Y.W. Chung; W.J. Lee 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 725 KB

Low cycle fatigue behaviors in Nb-bearing high strength, low alloy (HSLA) steel have been studied at plastic strain amplitudes Aep/2 ranging from 1 x 10 -5 to 1 x 10 -2 in air and in ultrahigh vacuum (UHV). Microcracks are initiated along slip lines both in air and in UHV, and grain boundaries act a

Using a corrected least-squares procedur

Using a corrected least-squares procedure and accounting for structural parameters when analyzing the correlation between the impact strength of low-alloyed steels and their coercive force

✍ G. V. Bida 📂 Article 📅 2011 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 408 KB

Mechanisms and modeling of cleavage frac

Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel

✍ A. Lambert-Perlade; T. Sturel; A. F. Gourgues; J. Besson; A. Pineau 📂 Article 📅 2004 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 679 KB