𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Studies On the Dynamic Behaviour Of A Cantilever Beam With Varying Thickness

✍ Scribed by P.K. Roy; N. Ganesan


Publisher
Elsevier Science
Year
1994
Tongue
English
Weight
341 KB
Volume
177
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

✦ Synopsis


A detailed study has been conducted on the effect of different types of variations of thickness profiles on the amplitudes of deflection and the dynamic bending stress of a cantilever beam under a point harmonic load. The response has been calculated for excitation frequencies corresponding to the first three natural frequencies. In each case the results obtained for different types of thickness variations are compared with those obtained for a uniform thickness beam. It is observed that considerable reduction in amplitude and/or bending stress can be achieved by proper selection of thickness variation.


πŸ“œ SIMILAR VOLUMES


THE EFFECTS OF CLOSURE OF CRACKS ON THE
✍ M. KISA; J. BRANDON πŸ“‚ Article πŸ“… 2000 πŸ› Elsevier Science 🌐 English βš– 219 KB

The paper develops a "nite element scheme for computing the eigensystem for a cracked beam for di!erent degrees of closure. Previous work in the authors' laboratories has indicated that the ability to extend the use of mode superposition to model breathing conditions in the crack zone would overcome

VIBRATIONS OF A CANTILEVER TAPERED BEAM
✍ N.M. Auciello; G. NolΓ¨ πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science 🌐 English βš– 234 KB

The free vibration frequencies of a beam composed of two tapered beam sections with different physical characteristics with a mass at its end can be determined by using either the exact procedure, for which purpose the solution to the problem can be expressed using Bessel functions, or the approxima

ON THE EIGENFREQUENCIES OF A CANTILEVER
✍ M. GΓΌrgΓΆze πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 431 KB

This paper deals with the derivation of the frequency equation of a special combined dynamic system. It consists of a clamped-free Bernoulli-Euler beam with a tip mass where a spring-mass system is attached to it. The derivation of the frequency equation is essentially carried out by means of the La