Studies on syntheses and properties of episulfide-type optical resins with high refractive index

✍ Scribed by Changli Lü; Zhanchen Cui; Yongxia Wang; Bai Yang; Jiacong Shen

• Publisher: John Wiley and Sons
• Year: 2003
• Tongue: English
• Weight: 74 KB
• Volume: 89
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/app.12459

✦ Synopsis

Abstract

A series of novel high refractive index episulfide‐type optical resins were prepared by ring‐opening copolymerization of bis(β‐epithiopropylthioethyl) sulfide (BEPTES) with episulfide derivative of diglydicyl ether of bisphenol A (ESDGEBA) and 2,4‐tolylene diisocyanate (TDI), respectively, in the presence of triethylamine as a curing catalyst. The episulfide monomers, BEPTES and ESDGEBA, were synthesized from their corresponding epoxy compounds, respectively. The cured transparent resins exhibit high refractive index (n~d~ > 1.63) and relatively low dispersion. The refractive index (n~d~) and Abbe's number (ν~d~) of the BEPTES/ESDGEBA curing system increased linearly with the weight content of BEPTES monomer in the range from 1.633 and 34.0 for the copolymer with 10 wt % of BEPTES to 1.697 and 38.1 for the homopolymer of pure BEPTES. For the BEPTES/TDI curing system, the refractive index and Abbe's number varied linearly with the molar ratio of BEPTES to TDI from 1.652 and 28.7 to 1.669 and 34.6. High glass‐transition temperatures (T~g~ > 130°C) of the cured BEPTES/TDI resins were observed, which indicate that the cured BEPTES/TDI resins possess a good heat resistance. The optical, physical, and thermal properties of the episulfide‐type cured optical resins were also discussed in this study. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2426–2430, 2003