✦ LIBER ✦

Studies on preparation and properties of the multi-walled carbon nanotubes (MWNTs)/epoxy nanocomposites

✍ Scribed by Huayang Deng; Qi Cao; Xianyou Wang; Quanqi Chen; Hao Kuang; Xiaofeng Wang

Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 970 KB
Volume: 528
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2011.04.010

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fabrication and mechanical properties of

Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites

✍ Meng-Kao Yeh; Tsung-Han Hsieh; Nyan-Hwa Tai 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 427 KB

A study of oxyfluorination of multi-wall

A study of oxyfluorination of multi-walled carbon nanotubes on mechanical interfacial properties of epoxy matrix nanocomposites

✍ Soo-Jin Park; Hyo-Jin Jeong; Changwoon Nah 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 89 KB

Multi-walled carbon nanotubes (MWNTs) were oxyfluorinated at several different temperatures. The changes of surface properties of oxyfluorinated MWNTs were investigated using FT-IR, EDS and XRD. The treated MWNTs were embedded in the epoxy resin and the fracture behavior of the resulting composites

Study on dispersion and electrical prope

Study on dispersion and electrical property of multi-walled carbon nanotubes/low-density polyethylene nanocomposites

✍ Xie Na; Jiao Qingjie; Zang Chongguang; Wang Chenglong; Liu Yuanyuan 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 853 KB

Sonication is one of the promising approaches to disperse nanoparticles into the base material thoroughly. Furthermore, coupling treatments for MWNTs and polymer matrix also contribute to homogenous dispersion of MWNTs among polymer matrix. In this paper, MWNTs and KH-550 were dispersed with acetone

Preparation and properties of hydroxylat

Preparation and properties of hydroxylated styrene–butadiene–styrene tri-block copolymer/multi-walled carbon nanotubes nanocomposites via covalent bond

✍ Guoliang Wu; Li Zhou; Encai Ou; Yanyan Xie; Yuanqin Xiong; Weijian Xu 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 704 KB

Melt processing and mechanical property

Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite films

✍ Wenzhong Tang; Michael H Santare; Suresh G Advani 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 831 KB

High density polyethylene (HDPE) was used as the matrix material for a carbon nanotube (CNT) polymer composites. This combination of composite constituents has not been previously reported in the literature. Multi-wall carbon nanotube (MWNT) / HDPE composite films were fabricated using the melt proc

Morphology and electrical properties of

Morphology and electrical properties of polymethylmethacrylate/poly(styrene-co-acrylonitrile)/multi-walled carbon nanotube nanocomposites

✍ Minho Lee; Hyeonyeol Jeon; Byong Hun Min; Jeong Ho Kim 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 451 KB 👁 2 views

## Abstract Nanocomposites of blends of polymethylmethacrylate (PMMA) and poly(styrene‐__co__‐acrylonitrile) (SAN) with multi‐walled carbon nanotubes (MWCNTs) were prepared by melt mixing in a twin‐screw extruder. The dispersion state of MWCNTs in the matrix polymers was investigated using transmis