Studies on polyamide-6/polyolefin blend system compatibilized with epoxidized natural rubber
✍ Scribed by Bang-hu Xie; Ming-bo Yang; Si-dong Li; Zhong-ming Li; Jian-min Feng
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 135 KB
- Volume
- 88
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Infrared spectra of polyamide‐6 (PA6) with and without epoxidized natural rubber (ENR) are presented. The influence of ENR used as a compatibilizer on the morphologies, crystallizability, mechanical properties, and thermal behavior of the polyamide‐6/polyolefins (PO) blends are studied. The infrared spectra suggest that under normal processing conditions, the carboxyl end groups of PA6 could chemically react in situ with the epoxy groups of ENR, and ester groups are created. This means that the PA6‐ENR grafting copolymer could be obtained during processing. All the morphological characterizations and thermal analyses show that the compatibility of PA6/PO blends is obviously improved by ENR because the copolymer increases the interaction between PA6 and PO. It is also found that the toughness of PA6/PO blends increase significantly after using ENR, while the tensile strength and the softening temperature of PA6/PO blends have almost no change. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 398–403, 2003