𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Structure, thermal stability and electrical properties of Ca(V0.5Mo0.5)O3 as solid oxide fuel cell anode

✍ Scribed by A. Aguadero; C. de la Calle; J.A. Alonso; D. Pérez-Coll; M.J. Escudero; L. Daza


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
653 KB
Volume
192
Category
Article
ISSN
0378-7753

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Study of the Crystal Structure, Thermal
✍ A. Aguadero; C. de la Calle; D. Pérez-Coll; J. A. Alonso 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 378 KB

## Abstract The Sr(V~0.5~Mo~0.5~)O~3~ perovskite has been prepared and characterised and its stability under oxidising and reducing conditions has been tested in order to evaluate its potential use as anode in solid oxide fuel cells (SOFC). The crystal structure of Sr(V~0.5~Mo~0.5~)O~3~ (reduced ph

(Mo0.3V0.7)2O5 as a solid solution catho
✍ M. Pasquali; G. Pistoia; F. Rodante 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 433 KB

It has been shown in Part I of this work that (Mo0~sV0.,)z05 has an electrochemical behaviour different from that of VzO,. The two oxides have similar structures, with the MOs octahedra linked by corner and edge sharing to form interconnected zig-zag chains. These structures can incorporate Li+ ions

Fabrication and characterization of a Ba
✍ Wei-Xin Kao; Maw-Chwain Lee; Tai-Nan Lin; Chun-Hsiu Wang; Yang-Chuang Chang 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 614 KB

Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-ı (BSCF) and gadolinia-doped ceria (GDC) were synthesized via a glycine-nitrate process (GNP). A cubic perovskite of BSCF was observed by X-ray diffraction (XRD) at a calcination temperature above 950 • C. An anode-supported solid-oxide fuel cell was constructed from

Flame Spray Synthesis of Nanoscale La0.6
✍ A. Heel; P. Holtappels; P. Hug; T. Graule 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 842 KB

One of the primary scientific aims within the solid oxide fuel cell (SPOFC) community is to lower the operating temperature of an SOFC system from about 800-1,000 °C to intermediate temperatures of about 600 °C [1]. The lower operating temperature decreases thermal stress in the materials and offers