✦ LIBER ✦

Structure development during superplastic deformation of an Al-Mg-Sc-Zr alloy

✍ Scribed by P. Málek; K. Turba; M. Cieslar; I. Drbohlav; T. Kruml

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 744 KB
Volume: 462
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2006.01.171

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Superplasticity in an Al–Mg–Zr–Sc alloy

Superplasticity in an Al–Mg–Zr–Sc alloy produced by equal-channel angular pressing

✍ K. Turba; P. Málek; M. Cieslar 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 613 KB

Superplastic deformation of an as-rolled

Superplastic deformation of an as-rolled Al–Cu–Mg–Ag alloy

✍ D.H. Xiao; M. Song 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 735 KB

Change in crystallographic orientation d

Change in crystallographic orientation distribution during superplastic deformation in an Al–Zn–Mg–Cu alloy

✍ Yoshimasa Takayama; Norio Furushiro; Eizo Kimijima; Hajime Kato 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 703 KB

Dynamic precipitation during severe plas

Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy

✍ Hans J. Roven; Manping Liu; Jens C. Werenskiold 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 625 KB

Creep behavior and threshold stress of a

Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy

✍ S.P Deshmukh; R.S Mishra; K.L Kendig 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 250 KB

Rapid precipitation of dispersoids durin

Rapid precipitation of dispersoids during extrusion of an Al–0.91 wt.% Mn–0.13 wt.% Zr–0.17 wt.% Sc-alloy

✍ B. Forbord; L. Auran; W. Lefebvre; H. Hallem; K. Marthinsen 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 439 KB

Dispersoids are usually formed during precipitation annealing (homogenisation) of aluminium alloys in order to inhibit recrystallisation during subsequent processing and/or use at high temperatures. In this respect, Al 3 (Sc x ,Zr 1-x )-dispersoids are most efficient, as they display the unique comb