𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Structure and properties of segmented polyurethane-ureas with dissimilar soft blocks

✍ Scribed by V. V. Tereshatov; V. N. Strel’nikov; M. A. Makarova; V. Yu. Senichev; E. R. Volkova

Book ID
111463313
Publisher
SP MAIK Nauka/Interperiodica
Year
2010
Tongue
English
Weight
200 KB
Volume
83
Category
Article
ISSN
1070-4272

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Structure and viscoelastic properties of
Structure and viscoelastic properties of segmented polyurethane blends
✍ Toshikazu Takigawa; Masaya Oodate; Kenji Urayama; Toshiro Masuda 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 489 KB 👁 2 views

Structure and viscoelastic properties of segmented polyurethanurea (SPU) blends were investigated. The glass transition temperature (T,) of poly(tetramethy1ene glycohol) (PTMG) in a soft-segment block of the component SPU increased with decreasing molecular weight of PTMG. The blend samples showed t

Molecular mobility and hydration propert
Molecular mobility and hydration properties of segmented polyurethanes with varying structure of soft- and hard-chain segments
✍ A. Kanapitsas; P. Pissis; J. L. Gomez Ribelles; M. Monleon Pradas; E. G. Privalk 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 232 KB 👁 2 views

The molecular mobility and hydration properties of model segmented polyurethanes from either poly(propylene glycol) (PPG) or poly(butylene adipate) (PBAD), both of molecular weight 2000 (soft segments), and three different diisocyanates (all-trans 4,4Јdicyclohexylmethane diisocyanate, 100% t,t HMDI;

Preparation and properties of segmented
Preparation and properties of segmented thermoplastic polyurethane elastomers with two different soft segments
✍ Han-Do Kim; Tae-Jung Lee; Jae-Ho Huh; Dong-Jin Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 214 KB 👁 2 views

Thermoplastic polyurethane elastomers were prepared from 4,4-diphenylmethane diisocyanate (MDI)/1,4-butanediol (BD)/poly(propylene glycol) (PPG) and MDI/BD/poly(oxytetramethylene glycol) (PTMG). The MDI/BD-based hard-segment content of polyurethane prepared in this study was of 39 -65 wt %. These po