✦ LIBER ✦

Structure and mechanical properties of Cu-Al alloys under pulsed compression

✍ Scribed by G. I. Shakhalova; A. I. Evplov

Book ID: 112407393
Publisher: Springer
Year: 1992
Tongue: English
Weight: 272 KB
Volume: 24
Category: Article
ISSN: 0039-2316
DOI: 10.1007/bf00777178

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Structure and mechanical properties of m

Structure and mechanical properties of mechanically alloyed Al/Al-Cu-Fe composites

✍ S. D. Kaloshkin; V. V. Tcherdyntsev; A. I. Laptev; A. A. Stepashkin; E. A. Afoni 📂 Article 📅 2004 🏛 Springer 🌐 English ⚖ 168 KB

Mechanical properties of Cu-Al-Fe alloys

✍ N. N. Myuller; A. V. Agafonova 📂 Article 📅 1979 🏛 Springer US 🌐 English ⚖ 332 KB

Structure and mechanical Properties of A

Structure and mechanical Properties of Al-40% Cu Directionally Solidified Alloy

✍ Frau Dr.-Ing. N. A. El-Mahallawy; Dr.-Ing. M. A. Taha 📂 Article 📅 1977 🏛 John Wiley and Sons 🌐 English ⚖ 521 KB

## Abstract Commercial purity Al‐40% Cu alloys were directionally solidified under a constant temperature gradient of 9 K/mm and growth rate (R) varying from 8 to 305 μm/sec. Cellular structure was obtained with a single primary CuAl~2~ rod‐like dendrite in the cell centre and a fanned‐out eutectic

Structure and properties of mechanically

Structure and properties of mechanically alloyed composite materials Al/Al-Cu-Fe quasicrystal

✍ V. V. Cherdyntsev; S. D. Kaloshkin; I. A. Tomilin; E. V. Shelekhov; A. I. Laptev 📂 Article 📅 2007 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 298 KB

Structure and mechanical properties of A

Structure and mechanical properties of Al−Si alloys obtained by crystallization under pressure

✍ A. Ya. Shinyaev; A. I. Litvintsev; O. G. Pivkina 📂 Article 📅 1983 🏛 Springer US 🌐 English ⚖ 513 KB

Formation and mechanical properties of Z

Formation and mechanical properties of ZrCuAl bulk glassy alloys

✍ Yoshihiko Yokoyama; Kenzo Fukaura; Akihisa Inoue 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 457 KB

We used highly purified elements (i.e. low-oxygen-content Zr metal) and a special arc melting and casting furnace to prepare Zr 50 Cu 40 Al 10 rod-shaped bulk glassy alloy over 10 mm in diameter. In the Zr-Cu-Al alloy system, we examined the glass-forming ability in the bulk glassy state by T x , T