✦ LIBER ✦

Structural, Electrical, Mechanical, and Thermal Properties of Electrospun Poly(lactic acid)/Polyaniline Blend Fibers

✍ Scribed by Paulo H. S. Picciani; Eliton S. Medeiros; Zhongli Pan; Delilah F. Wood; William J. Orts; Luiz H. C. Mattoso; Bluma G. Soares

Publisher: John Wiley and Sons
Year: 2010
Tongue: English
Weight: 997 KB
Volume: 295
Category: Article
ISSN: 1438-7492
DOI: 10.1002/mame.201000019

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Conducting electrospun fiber mats based on PLA and PAni blends were obtained with average diameter values between 87 and 1 006 nm with PAni quantities from 0 to 5.6 wt.‐%. Structural characteristics of fiber mats were compared to cast films with the same amount of PAni and studied by SEM, SAXS, and AFM. Thermal properties of fiber mats and cast films were compared by DSC analyses. Mechanical properties of fiber mats were also evaluated. It was found that electrospinning process governs the crystal structure of the fibers and strongly affects fiber properties. New properties of PLA/PAni blends are reported due to the size fiber reduction.

magnified image

📜 SIMILAR VOLUMES

Poly(para-dioxanone) and poly(L-lactic a

Poly(para-dioxanone) and poly(L-lactic acid) blends: thermal, mechanical, and morphological properties

✍ A. P. T. Pezzin; G. O. R. Alberda Van Ekenstein; C. A. C. Zavaglia; G. Ten Brink 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 755 KB

Mechanical and thermal properties of pol

Mechanical and thermal properties of poly(lactic acid)/starch blends with dioctyl maleate

✍ Jian-Feng Zhang; Xiuzhi Sun 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 179 KB 👁 2 views

## Abstract Poly(lactic acid) (PLA)/starch blends were prepared blending with dioctyl maleate (DOM). DOM acted as a compatibilizer at low concentrations (below 5%), and markedly improved tensile strength of the blend. However, DOM functioned as a plasticizer at concentrations over 5%, significantly

Mechanical properties of poly(ε-caprolac

Mechanical properties of poly(ε-caprolactone) and poly(lactic acid) blends

✍ C. L. Simões; J. C. Viana; A. M. Cunha 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 1 views

Thermal and mechanical properties of pla

Thermal and mechanical properties of plasticized poly(L-lactic acid)

✍ Massimo Baiardo; Giovanna Frisoni; Mariastella Scandola; Michel Rimelen; David L 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 221 KB 👁 2 views

Dynamic mechanical and thermal propertie

Dynamic mechanical and thermal properties of plasticized poly(lactic acid)

✍ Zhongjie Ren; Lisong Dong; Yuming Yang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 628 KB

Mechanical properties and structure of t

Mechanical properties and structure of the zone-drawn poly(L-lactic acid) fibers

✍ Hidenori Okuzaki; Isamu Kubota; Toshio Kunugi 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 148 KB 👁 2 views

The zone-drawing (ZD) method was applied three times to the melt-spun poly(L-lactic acid) (PLLA) fibers of low molecular weight (M v ϭ 13,100) at different temperatures under various tensions. The mechanical properties and superstructure of the ZD fibers were investigated. The resulting ZD-3 fiber h