✦ LIBER ✦

Structural changes during mechanical alloying of elemental Al-Ti, Al-Nb and Ti-Si powders

✍ Scribed by D. Oleszak; M. Burzynska-Szyszko; H. Matyja

Publisher: Springer
Year: 1993
Tongue: English
Weight: 233 KB
Volume: 12
Category: Article
ISSN: 0261-8028
DOI: 10.1007/bf00275453

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The Structure of the Ti3Al Phase in Ti—A

The Structure of the Ti3Al Phase in Ti—Al and Ti—Al—Nb Alloys.

✍ S. Banumathy; P. Ghosal; A. K. Singh 📂 Article 📅 2005 🏛 John Wiley and Sons ⚖ 9 KB

## Abstract For Abstract see ChemInform Abstract in Full Text.

Synthesis of amorphous and metastable Ti

Synthesis of amorphous and metastable Ti40Al60alloys by mechanical alloying of elemental powders

✍ W. Guo; A. Iasonna; M. Magini; S. Martelli; F. Padella 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 847 KB

Ti4oAl~o amorphous and metastable alloys have been prepared by mechanical alloying (MA), under controlled milling conditions in a planetary mill. Three different quantities of kinetic energy at the collision instant have been achieved by using balls of different size, d~b = 5, 8 and 12 mm, keeping c

Properties and structural characteristic

Properties and structural characteristics of Ti–Nb–Al alloys

✍ L.A. Matlakhova; A.N. Matlakhov; S.N. Monteiro; S.G. Fedotov; B.A. Goncharenko 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 267 KB

Corrosion-mechanical and electrochemical

Corrosion-mechanical and electrochemical properties of Ti-Al-Ni AND Ti-V-Nb system alloys

✍ Yu. N. Belousov; N. G. Lebedeva; R. K. Melekhov; V. S. Mikheev; G. D. Shnyrev 📂 Article 📅 1985 🏛 Springer 🌐 English ⚖ 417 KB

Structural Evolution during Reactive Mec

Structural Evolution during Reactive Mechanical Milling of TiC/Ti-Al Nanocomposites

✍ Dongdong Gu; Yifu Shen 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 639 KB

Process optimization of Ti–Nb alloy coat

Process optimization of Ti–Nb alloy coatings on a Ti–6Al–4V plate using a fiber laser and blended elemental powders

✍ Vahid Fallah; Stephen F. Corbin; Amir Khajepour 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 762 KB

A fiber laser was used to modify the surface composition of a Ti-6Al-4V plate through deposition of the blown powder mixture of Ti-45 wt.%Nb. Scanning electron microscopy and energy dispersive spectroscopy (EDS) were employed to examine the clad sections microstructure and chemical composition. The