In this paper, we report the structural and superconducting properties of MgB 2 /Fe wires that are produced by different sintering conditions. Good quality MgB 2 /Fe wires are fabricated by the powder-in-tube (PIT) method using commercially available MgB 2 powder at ambient pressure. In order to che
Structural and low-field magnetic characterization of superconducting MgB2 wires
✍ Scribed by A. Kılıç; S. Okur; N. Güçlü; U. Kölemen; O. Uzun; L. Özyüzer; A. Gencer
- Publisher
- Elsevier Science
- Year
- 2004
- Tongue
- English
- Weight
- 353 KB
- Volume
- 415
- Category
- Article
- ISSN
- 0921-4534
No coin nor oath required. For personal study only.
✦ Synopsis
Superconducting MgB 2 composite wires were prepared by packing blend of MgB 2 inside of Cu tubes using powder in tube (PIT) method. The produced samples of the wires were then characterised by using SEM, XRD and AC susceptibility measurements. The measured fundamental susceptibility is compared with Bean model. We have obtained an empirical functions for the penetration field H p = H a (1Àt) b , where t is the reduced temperature. In addition, ac losses were calculated at the same fixed temperatures to compare theoretical solutions. There is a qualitative agreement between the experimental results and theory.
📜 SIMILAR VOLUMES
A new measurement system for rapid characterization of superconducting wires and tapes is developed. The CryoPulse-BI is a system to provide a direct measurement of critical material parameters for superconducting materials when high long pulsed magnetic fields and strong currents are applied. In th
Superconducting Cu/Fe/MgB 2 and Steel/Cu/MgB 2 rods were prepared through the ex-situ modified PIT technique with explosive consolidation method. The phase composition, microstructural features were investigated by X-ray diffraction and scanning electron microscope. The AC susceptibility for a core