✦ LIBER ✦

Stress Intensity Factors for semi-elliptical surface cracks in round bars under bending and torsion

✍ Scribed by Manuel da Fonte; Manuel de Freitas

Book ID: 108401478
Publisher: Elsevier Science
Year: 1999
Tongue: English
Weight: 209 KB
Volume: 21
Category: Article
ISSN: 0142-1123
DOI: 10.1016/s0142-1123(98)00090-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stress-intensity factors for semi-ellipt

Stress-intensity factors for semi-elliptical surface cracks under tension or bending

✍ Andrea Carpinteri 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 528 KB

The problem of a beam containing a semi-elliptical surface crack and subjected to tension or bending loading is investigated. The stress-intensity factor along the crack front can be calculated assuming a model with finite strips arranged in series and parallel. Several cases are analysed varying th

Stress-intensity factors for semi-ellipt

Stress-intensity factors for semi-elliptical surface cracks in welded joints

✍ X. Niu; G. Glinka 📂 Article 📅 1989 🏛 Springer Netherlands 🌐 English ⚖ 745 KB

Stress intensity factors for longitudina

Stress intensity factors for longitudinal semi-elliptical surface cracks in a pipe under thermal loading

✍ H Greener; U Strathmeier 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 379 KB

intensity factors were calculated at the deepest point and at the surface points of longitudinal semi-elliptical surface cracks in a thermally shocked pipe. The method of calculation is based on weight functions following a proposal by Mattheck, Munz and Stamm, Engng. Fract. Mech. 18, 633-641 (1983)

Stress intensity factors for surface fat

Stress intensity factors for surface fatigue crack in a round bar under cyclic axial loading

✍ F. P. YANG; Z. B. KUANG 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 674 KB

Calculation of Stress Intensity Factors

Calculation of Stress Intensity Factors for semi-elliptical surface cracks in a turbine rotor

✍ H. Grebener; U. Strathmeier; G. Gnirß; W. Herzog 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 296 KB 👁 1 views

Weight functions and Stress Intensity Ma

Weight functions and Stress Intensity Magnification factors for elliptical and semi-elliptical cracks under variable normal stress – Part II

✍ Dipl.-Ing. W. Huget; Dipl.-Ing. T. Reddemann; Dr.-Ing. L. Grüter 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 344 KB

Surface. cracks under peak stresses are investigated. The calculational procedure is based on the general form of the weight function for an elliptical crack embedded in an infinite solid. Two points on the contour of the ellipse are investigated. A new correction procedure for transfer from the emb