✦ LIBER ✦

Stress intensity factors and crack opening displacements for slanted axial through-wall cracks in pressurized pipes

✍ Scribed by N.-S. HUH; D.-J. SHIM; S. CHOI; K.-B. PARK

Book ID: 109015388
Publisher: John Wiley and Sons
Year: 2008
Tongue: English
Weight: 847 KB
Volume: 31
Category: Article
ISSN: 8756-758X
DOI: 10.1111/j.1460-2695.2008.01235.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stress intensity factors for slanted thr

Stress intensity factors for slanted through-wall cracks based on elastic finite element analyses

✍ N.-S. HUH; D.-J. SHIM; S. CHOI; G. M. WILKOWSKI; J.-S. YANG 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 683 KB

Experimental calibration of stress inten

Experimental calibration of stress intensity factor for piping with circumferential through-wall crack

✍ C.S. Shin; C.M. Wang 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 1011 KB

Determination of stress intensity factor

Determination of stress intensity factors and crack-opening stresses from jumps in crack-edge displacements

✍ V. N. Maksimenko 📂 Article 📅 1994 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 679 KB

Stress-intensity factors and crack-openi

Stress-intensity factors and crack-opening displacements for round compact specimens

✍ J. C. Newman 📂 Article 📅 1981 🏛 Springer Netherlands 🌐 English ⚖ 643 KB

Stress intensity factors for an axially

Stress intensity factors for an axially oriented internal crack embedded in a buried pipe

✍ M.R. Ayatollahi; H. Khoramishad 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 635 KB

Stress intensity factors for long axial

Stress intensity factors for long axial surface cracks at the outer wall of a pipe loaded by stress gradients

✍ H. Grebner 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 297 KB 👁 1 views

By means of the finite element method crack opening displacements were calculated for long axial surface cracks at the outer wall of a pipe. The wall thickness to inner radius ratio of the pipe was 1 to 10. Following a procedure introduced be Mattheck et al. weight functions were evaluated by means