✦ LIBER ✦

Stress intensity coefficients of cylindrical specimens with a circumferential crack of variable depth

✍ Scribed by S. Ya. Yarema

Publisher: Springer
Year: 1972
Tongue: English
Weight: 306 KB
Volume: 6
Category: Article
ISSN: 1573-885X
DOI: 10.1007/bf00721279

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stress intensity factors of a twisted ro

Stress intensity factors of a twisted round bar with a circumferential crack

✍ Y. Yamamoto; Y. Sumi 📂 Article 📅 1974 🏛 Springer Netherlands 🌐 English ⚖ 111 KB

Determination of dynamic stress intensit

Determination of dynamic stress intensity coefficients for body with halfplane crack

✍ M. V. Khai; V. V. Mykhas'kiv 📂 Article 📅 1985 🏛 Springer US 🌐 English ⚖ 457 KB

Four-point bending of a cylindrical spec

Four-point bending of a cylindrical specimen with an external circumferential notch

✍ I. N. Pan'ko; V. A. Zazulyak 📂 Article 📅 1979 🏛 Springer 🌐 English ⚖ 241 KB

Stress Intensity Factors of a circumfere

Stress Intensity Factors of a circumferential surface crack at the outside of a thermally loaded pipe

✍ Dr. H. Grebner 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 1 views

## Abstract Stress intensity factors were calculated for partly circumferential surface cracks at the outside of a pipe. The pipe is loaded by internal pressure and by thermal stresses. The weight functions method is used to calculate averaged weighted stress intensity factors at the deepest point

Stress-intensity coefficient taking acco

Stress-intensity coefficient taking account of local buckling of plates with cracks

✍ M. Sh. Dyshel' 📂 Article 📅 1990 🏛 Springer US 🌐 English ⚖ 279 KB

Transient thermal stress-intensity facto

Transient thermal stress-intensity factors for short edge cracks with equal depth of crack tips

✍ Zhang Peizhong; Christian P. Burger 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 841 KB

## Stress intensity factors were determined for very short edge cracks with different inclinations but equal depths of crack tips from the heated edge of a plate under transient thermal stresses. The critical orientation of edge cracks was found experimentally.