✦ LIBER ✦

Stress-Cracking of high density polyethylene in detergents

✍ Scribed by Koksal Tonyali; Charles E. Rogers; Hugh R. Brown

Publisher: Society for Plastic Engineers
Year: 1987
Tongue: English
Weight: 481 KB
Volume: 27
Category: Article
ISSN: 0032-3888
DOI: 10.1002/pen.760270112

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Detergent assisted stress cracking in lo

Detergent assisted stress cracking in low density polyethylene

✍ P. Chang; J. A. Donovan 📂 Article 📅 1990 🏛 Society for Plastic Engineers 🌐 English ⚖ 876 KB

## Abstract Igepal assisted environmental stress cracking (ESC) of LDPE has shown three characteristic regions with increasing crack driving force: Region I‐crack speed and craze length increased. Region II‐crack speed and duplex plastic zone length were constant, and Region Ill‐crack speed decreas

Kinetics of environmental stress crackin

Kinetics of environmental stress cracking in high density polyethylene

✍ R.A Bubeck 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 591 KB

Spherulitic cracking in high density pol

Spherulitic cracking in high density polyethylene

✍ David Fotheringham; Brendon Parker 📂 Article 📅 1976 🏛 Springer 🌐 English ⚖ 417 KB

Environmental stress cracking of low-den

Environmental stress cracking of low-density polyethylene in normal alcohols

✍ Nobuo Ogata; Teruaki Yanagwa; Koukichi Yoshida 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 435 KB

Effects of detergent concentration and e

Effects of detergent concentration and ethylene oxide chain length of the detergent molecule on stress-cracking of low-density polyethylene

✍ Köksal Tonyali; Hugh R. Brown 📂 Article 📅 1987 🏛 Springer 🌐 English ⚖ 566 KB

A study of crack propagation in high-den

A study of crack propagation in high-density polyethylene

✍ Ray D. Hoffman 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 869 KB

In recent published work a method was proposed to calculate fracture toughness during the crack-propagation phase of the loading of notched specimens. In this paper, it is proposed that the fracture toughness J can have a value that does not exceed the product of the ultimate work to failure of the