✦ LIBER ✦

Stress analysis of a strip with a step and a crack

✍ Scribed by Hasebe Norio; Matsuura Sei; kondo Nobuyuki

Publisher: Elsevier Science
Year: 1984
Tongue: English
Weight: 1015 KB
Volume: 20
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(84)90050-x

No coin nor oath required. For personal study only.

✦ Synopsis

Abs&act-Stress aualysis for a strip of which widths are. d&rent at the right and left handsides is carried out for before and after occurrence of a crack at a comer of a step. The strip is analyzed as a thin plate bending problem subject to transverse bending and torsion, and as a plane eleastic problem subject to bending in the plane and uniaxial tension. The rational mapping function of a sum of fractional expressions and complex variable method are used. Stress distribution and stress intensity factors are obtained.

📜 SIMILAR VOLUMES

Stress analysis of a crack at a juncture

Stress analysis of a crack at a juncture of a strip and a half-plane

✍ N. Hasebe; M. Miwa; T. Nakamura 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 812 KB

An elastic plate with a crack at a juncture of a strip and a half-plane is analysed as a thin plate bending problem and as a plane elastic problem. Four and three loading conditions are considered for each problem. Stress distributions near the crack and the juncture are investigated. The stress int

Analysis of stress intensity factors for

Analysis of stress intensity factors for the tension of a centrally cracked strip with stiffened edges

✍ M. Isida 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 946 KB

A note on the central crack in a uniform

A note on the central crack in a uniformly stressed strip

✍ O.L. Bowie; D.M. Neal 📂 Article 📅 1970 🏛 Elsevier Science 🌐 English ⚖ 114 KB

THE CENTRAL crack in a uniformly stressed strip has been a standard fracture toughness test configuration for many years and the corresponding stress analysis has been the subject of several numerical investigations, e.g. Ref. [I]. The results are often presented in the form,

Stresses in an orthotropic strip contain

Stresses in an orthotropic strip containing A Griffith Crack

✍ P.K. Satapathy; H. Parhi 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 534 KB

Stress intensity factor for a crack pass

Stress intensity factor for a crack passing through a thickness step

✍ Toshihiko Nishimura; Tetsuo Uchimoto; Koichi Hiraoka 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 712 KB

Stress intensity factors for a crack passing through a step in a plate where the thickness discontinuously decreases were derived from crack propagation tests and two-dimensional finite element analysis. Finite element analysis was used to generalize the effect of geometric parameters (plate width,

Step on a Crack

✍ James Patterson; Michael Ledwidge 📂 Fiction 📅 2010 🏛 Little, Brown and Company 🌐 English ⚖ 141 KB 👁 3 views