✦ LIBER ✦

Strength of a welded joint for an end cutting tool

✍ Scribed by P. P. Seredin-Sabatin

Publisher: Springer US
Year: 1985
Tongue: English
Weight: 169 KB
Volume: 27
Category: Article
ISSN: 0026-0673
DOI: 10.1007/bf00699498

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fatigue strength of dissimilar welded jo

Fatigue strength of dissimilar welded joints for the main vessel of an LMFBR

✍ K. Kuwabara; Y. Takahashi; S. Kawaguchi; Y. Fukuda; J. Fukakura 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 611 KB

Selection of optimum tool geometry and c

Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling

✍ N. Suresh Kumar Reddy; P. Venkateswara Rao 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 534 KB

Energy and force characteristics of a cu

Energy and force characteristics of a cutter-loader with an experimental cutting tool for work in cutting-resistant seams

✍ N. S. Arsenov; I. S. Petushkov; L. V. Gudimov; V. A. Sorozhkin; V. A. Fesun 📂 Article 📅 1973 🏛 Springer 🌐 English ⚖ 156 KB

Investigation of impact strength of weld

Investigation of impact strength of welded joints for low-alloy steel, made in a carbon dioxide medium or in mixtures of protective gases

✍ N. T. Lositskii; S. N. Berezhnitskii; V. K. Krasil'nikov 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 224 KB

A specimen with an internal circular cra

A specimen with an internal circular crack for studying the crack resistance of the material of profile weld joints

✍ N. S. Kogut 📂 Article 📅 1986 🏛 Springer 🌐 English ⚖ 269 KB

Structure-property investigations on a l

Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength

✍ W.V. Vaidya; M. Horstmann; V. Ventzke; B. Petrovski; M. Koçak; R. Kocik; G. Temp 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB

## Abstract Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treat