𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Strength and toughness measurement of thin brittle coatings on substrates Part I. Theory and measurement

✍ Scribed by J.H. Selverian; D. O'Neil

Book ID
107864217
Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
807 KB
Volume
235
Category
Article
ISSN
0040-6090

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Strength measurements of thin brittle Zr
Strength measurements of thin brittle ZrO2 coatings produced by magnetron sputtering on steel substrates
✍ M Andritschky; P Alpuim πŸ“‚ Article πŸ“… 1997 πŸ› Elsevier Science 🌐 English βš– 743 KB

## Conventional techniques for determining mechanincai properties usually cannot be appiied to ceramic, coatings because of the difficulties in handling thin brittle films with a thickness of about 5pm. However, analysis of crack spacing resulting from a four-point bending test of coating and substr

Measurement and control of interface str
Measurement and control of interface strength of RF magnetron-sputtered Ca-PO coatings on Ti-6Al-4V substrates using a laser spallation technique
✍ van Dijk, K. ;Gupta, V. ;Yu, A. K. ;Jansen, J. A. πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 617 KB

In previous studies, an RF magnetron sputter technique was developed for the production of thin calcium phosphate coating. Several deposition parameters were found to influence the growth rate and the stoichiometry of the coatings. For instance, deposition with additional oxygen pressure decreased t