✦ LIBER ✦

Strain-life fatigue predictions for sintered steels with nonzero mean stress

✍ Scribed by Ernani S. Palma; Paulo C. Greco

Book ID: 111785942
Publisher: Springer US
Year: 2000
Tongue: English
Weight: 67 KB
Volume: 9
Category: Article
ISSN: 1059-9495
DOI: 10.1361/105994900770345566

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of mean stress and ratcheting str

Effect of mean stress and ratcheting strain on fatigue life of steel

✍ Z. Xia; D. Kujawski; F. Ellyin 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 590 KB

An exponential stress function for predi

An exponential stress function for predicting fatigue strength and life due to mean stresses

✍ S Kwofie 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 166 KB

Prediction of fatigue limits of surface-

Prediction of fatigue limits of surface-hardened steel with regard to mean stresses and residual stresses—A comparison

✍ Frank Jablonski; Johanna Varvarikes 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 187 KB

Hardened parts are used to minimize abrasion at contact surfaces and to extend the lifetime of machine components. Different risks to failure, and therefore, different fatigue limits result from imperfections, notches and surface properties. Two methods for calculating fatigue limits of surface-hard

Fatigue life prediction for a material u

Fatigue life prediction for a material under programmable loading using the cyclic stress-strain properties

✍ V. Kliman 📂 Article 📅 1984 🏛 Elsevier Science ⚖ 691 KB

Prediction of Fatigue Life of a Notched

Prediction of Fatigue Life of a Notched Body by the Local Stress-Strain State. Part 3. Allowing for Stress and Strain Gradients

✍ P. A. Fomichev 📂 Article 📅 2000 🏛 Springer 🌐 English ⚖ 85 KB

Fatigue life prediction for stainless st

Fatigue life prediction for stainless steel welded plate CCT geometry based on Lawrence's local-stress approach

✍ P.Johan Singh; B. Guha; D.R.G. Achar 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 451 KB

In the present study, the effect of welding process and procedure on fatigue crack initiation from notches and fatigue crack propagation in AISI 304L stainless steel welds was experimentally investigated. Full penetration, double-vee butt welds have been fabricated and CCT type specimens were used.