✦ LIBER ✦

Stiffness and Thermal Expansion of Short Fiber Composites with Fully Aligned Fibers

✍ Scribed by A. Gusev; H.R. Lusti; P.J. Hine

Publisher: John Wiley and Sons
Year: 2002
Tongue: English
Weight: 255 KB
Volume: 4
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200290007

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Orientation Averaging for Stiffness and

Orientation Averaging for Stiffness and Thermal Expansion of Short Fiber Composites

✍ A. Gusev; M. Heggli; H.R. Lusti; P.J. Hine 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 463 KB

A parallel-supercomputing investigation

A parallel-supercomputing investigation of the stiffness of aligned, short-fiber-reinforced composites using the Boundary Element Method

✍ M. S. Ingber; T. D. Papathanasiou 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 205 KB 👁 2 views

Computational experiments are carried out in three-dimensional, multi-fibre specimens with the objective of determining the influence of fibre volume fraction () and aspect ratio (a ) on the effective tensile modulus of aligned, discontinuous fibre-reinforced composites. The Boundary Element Method

Electrical and thermal conductivities of

Electrical and thermal conductivities of polyethylene composites filled with biaxial oriented short-cut carbon fibers

✍ Y. Agari; A. Ueda; S. Nagai 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 487 KB 👁 2 views

Polyethylene composites filled with various types of carbon fiber were prepared for electrical and thermal conductivity measurements. By estimation of the anisotropic parameter (Hermans' parameter), the fibers were confirmed to be significantly biaxially oriented in the composites. The critical volu

Ablation and thermal properties of ethyl

Ablation and thermal properties of ethylene–propylene–diene elastomer composites reinforced with polysulfonamide short fibers

✍ Xiaolong Jia; Gang Li; Yunhua Yu; Gang Sui; Haiyang Liu; Ya'nan Li; Peng Li; Xia 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 969 KB

Morphology, thermal, and mechanical prop

Morphology, thermal, and mechanical properties of polypropylene/polyaniline coated short glass fiber composites

✍ Rodolfo Cruz-Silva; Jorge Romero-García; Sofía Vazquez-Rodriguez; Jose Luis Angu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 385 KB 👁 2 views

Thermal stability and nonisothermal crys

Thermal stability and nonisothermal crystallization of short fiber-reinforced poly(ether ether ketone) composites

✍ Ming Chen; Shiou-Chang Chao 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 1 views

The thermal stability of a short carbon-fiber-reinforced PEEK composite was assessed by thermogravimetry and by a Rheometrics dynamic analyzer. The results indicated that holding for 10 min at 380°C was a suitable melting condition to avoid the thermooxidative degradation under air. After proving th