✦ LIBER ✦

Steady-state creep characteristics of carbon black loaded butadiene rubber

✍ Scribed by S. S. Hamza; H. Osman

Publisher: Springer
Year: 1984
Tongue: English
Weight: 182 KB
Volume: 12
Category: Article
ISSN: 0170-0839
DOI: 10.1007/bf00275970

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Curing characteristics and mechanical pr

Curing characteristics and mechanical properties of vinyltriethoxysilane-coupled carbon black/styrene–butadiene rubber vulcanizates

✍ S. K. Rana 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 2 views

Styrene-butadiene rubber (SBR) vulcanizates containing 0 to 2.73 parts of vinyltriethoxysilane (VTEOS) per hundred parts of rubber (phr) were prepared, keeping the other ingredients weight constant. The mixes were tested for their curing behavior by a curemeter. The vulcanizates were analyzed throug

Effect of bound rubber on characteristic

Effect of bound rubber on characteristics of highly filled styrene–butadiene rubber compounds with different types of carbon black

✍ Sung-Seen Choi 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 104 KB 👁 2 views

Wear characteristics of styrene butadien

Wear characteristics of styrene butadiene rubber/natural rubber blends with varying carbon blacks by DIN abrader and mining rock surfaces

✍ Kaushik Pal; Tanya Das; R. Rajasekar; Samir K. Pal; Chapal K. Das 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 651 KB

## Abstract In this study, nine rubber compounds were produced by varying the proportions of natural rubber (NR), styrene butadiene rubber (SBR), and four different carbon blacks. Tensile and tear properties are enhanced by the addition of intermediate super abrasion furnace (ISAF) N231, and modulu

Effect of carbon black loading on curing

Effect of carbon black loading on curing characteristics and mechanical properties of waste tyre dust/carbon black hybrid filler filled natural rubber compounds

✍ H. Ismail; N. F. Omar; N. Othman 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 584 KB

The influence of state-of-mix on the ext

The influence of state-of-mix on the extrudate swell of a carbon black-filled styrene–butadiene rubber compound

✍ P. K. Freakley; C. Sirisinha 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 253 KB 👁 2 views

The factors which govern the extrudate swell of a styrene-butadiene rubber compound filled with 30 phr of N330 carbon black at various states-of-mix were investigated. The state-of-mix is quantified by an effective filler volume fraction, based on an estimate of the amount of rubber immobilized in t