✦ LIBER ✦

Stabilizing a scintillation spectrometer by means of a low frequency modulated light source

✍ Scribed by H.J. Rijks

Publisher: Elsevier Science
Year: 1961
Weight: 145 KB
Volume: 14
Category: Article
ISSN: 0029-554X
DOI: 10.1016/0029-554x(61)90055-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A long term stable reference light sourc

A long term stable reference light source using LEDs for stabilization of scintillation spectrometers

✍ W.L. Reiter; G. Stengl 📂 Article 📅 1980 🏛 Elsevier Science ⚖ 545 KB

A system for stabilizing the gain of a s

A system for stabilizing the gain of a scintillation spectrometer using a light-emitting diode and a processor in feedback

✍ R. Martinčič; V. Ivkovič; M. Tiringer 📂 Article 📅 1977 🏛 Elsevier Science ⚖ 359 KB

Partial coherence of light modified by a

Partial coherence of light modified by a frequency-modulated ultrasonic wave

✍ Yoshihiro Ohtsuka 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 440 KB

Modelling of the molecular beam intensit

Modelling of the molecular beam intensity distribution in the ion source of the mass spectrometer by means of a light beam

✍ Bogdan Adamczyk; Leszek Michalak 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 540 KB

Spatial fluorescence cross-correlation s

Spatial fluorescence cross-correlation spectroscopy by means of a spatial light modulator

✍ Yoann Blancquaert; Jie Gao; Jacques Derouard; Antoine Delon 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB

## Abstract Spatial fluorescence cross‐correlation spectroscopy is a rarely investigated version of fluorescence correlation spectroscopy, in which the fluorescence signals from different observation volumes are cross‐correlated. In the reported experiments, two observation volumes, typically shift

The use of a klystron oscillator, stabil

The use of a klystron oscillator, stabilized by a superconducting resonator, in an e p r spectrometer with high frequency modulator

✍ V.B. Ginodman; I.S. Gladkov; Yu.V. Dedik; Z.F. Kaplun 📂 Article 📅 1971 🏛 Elsevier Science 🌐 English ⚖ 256 KB

The outer diameter of this wire is 0" 52 mm and the ratio of A1 to NbTi is 1"0. The current field characteristic of the wire, for instance, heat treated at 300 C for 80 hours, is presented in Figure 2. With these results, the mean current density in the wire is 30 000 A cm -2 at 50 kG. Figure 3 show