Splat-cooled alloys in the Ag-Sn-Cu system
β Scribed by Johnson, L. B. ;Otani, H. ;Neary, M. J. ;Hauck, J. W. ;Heaven, T. M. ;Regenitter, R. J.
- Publisher
- John Wiley and Sons
- Year
- 1974
- Tongue
- English
- Weight
- 287 KB
- Volume
- 8
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
β¦ Synopsis
Strength, dimensional change during setting, and corrosion resistance have been measured for amalgams prepared from splat-cooled alloys of different compositions in the Ag-Sn-Cu system. The amalgam with optimum values of these properties was made from the alloy containing 60 at.
Ag, 25 at. % Sn, and 15 at. % Cu. Tensile strengths for amalgams from this alloy were about 8000 psi, dimensional change during settling near zero, and corrosion resistance was good.
X-Ray diffraction showed that the yI and y2 phases formed during the early stages of setting but that the yz phase had essentially disappeared after about 24 hr. At the latter time Cu6Sn6 was present.
π SIMILAR VOLUMES
## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a βFull Textβ option. The original article is trackable v
## Abstract A number of new Agβbased bulk metallic glasses in the title systems are prepared by induction melting.