Speed estimation of induction motor drive using d-axis slot harmonics and parameter identification method
✍ Scribed by Toshihiko Noguchi; Masahito Onaka
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 644 KB
- Volume
- 171
- Category
- Article
- ISSN
- 0424-7760
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This paper describes a rotor speed estimation technique of an induction motor, which utlizes slot harmonics on the d‐axis caused by permeance variation across the air gap. The frequency of the slot harmonics is a multiple of the actual rotor speed, and is proportional to the number of rotor slots. In order to extract the slot harmonics, a novel adaptive bandpass filter incorporating coordinate transformation is proposed, which is effective to estimate the rotor speed from 400 to 2000 rpm. This rotor speed estimation is applied to a field‐oriented controller as well as a speed controller. In addition, performance improvement is carried out by compensating a motor parameter mismatch. Feasibility of the proposed technique is confirmed through several tests, using a prototype experimental setup. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(2): 50–58, 2010; Published online in Wiley InterScience (www. interscience.wiley.com). DOI 10.1002/eej.20901