𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Speciation Analysis of Serum Copper by Ultrafiltration Combined with Graphite Furnace Atomic Absorption Spectrometry

✍ Scribed by Zhi-Hua Wang; Hui-Min Ma; Quan-Li Ma; Shu-Chuan Liang

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
334 KB
Volume
19
Category
Article
ISSN
0256-7660

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Determination of bismuth(III) by graphit
Determination of bismuth(III) by graphite furnace atomic absorption spectrometry combined with liquid-liquid extraction with trioctylmethylammonium nitrate
✍ Asako Minagawa; Kiyoshia Sawada; Toshio Suzuki πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 483 KB

A method for determining traces of bismuth(II1) in environmental samples by graphite furnace atomic absorption spectrometry (GFAAS) after extractive separation with trioctylmethylammonium nitrate (TOMA \* NO,) is described. Bismuth(II1) was quantitatively extracted and concentrated with 6% (w/v) TOM

Separation of Iron, Cobalt, Nickel, and
Separation of Iron, Cobalt, Nickel, and Copper from Aluminum Fluoride and Their Determination by Graphite Furnace Atomic Absorption Spectrometry
✍ J. Jaganathan; I. Aggarwal πŸ“‚ Article πŸ“… 1994 πŸ› Elsevier Science 🌐 English βš– 191 KB

An analytical method for the determination of iron, cobalt, nickel, and copper in aluminum fluoride has been described. The insolubility of \(\mathrm{AlF}_{3}\) in inorganic acids makes it necessary to separate these metals by leaching them with \(\mathrm{HNO}_{3}\). The metals that leached out were

Coprecipitation with tin(IV) hydroxide f
Coprecipitation with tin(IV) hydroxide followed by removal of tin carrier for the determination of trace heavy metals by graphite-furnace atomic absorption spectrometry
✍ Masataka Hiraide; Zou-Sheng Chen; Kohziro Sugimoto; Hiroshi Kawaguchi πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 390 KB

Nanogram amounts of trace heavy metals are quantitatively coprecipitated with tin( IV) hydroxide at pH 5-6. After centrifugation, the precipitate is dissolved in nitric acid and the solution is allowed to stand overnight to form stannic acid. More than 90% of tin is precipitated, leaving trace heavy

Determination of boron in iron- and nick
Determination of boron in iron- and nickel-based alloys by graphite furnace atomic absorption spectrometry with a zirconiumβ€”nickel chemical modifier and a zirconium-pretreated graphite tube
✍ Yongming Liu; Benling Gong; Yuli Xu; Zhuanhe Li; Tiezheng Lin πŸ“‚ Article πŸ“… 1994 πŸ› Elsevier Science 🌐 English βš– 320 KB

A chemical modifier composed of nickel and zirconium salts and treatment of the graphite tube with zirconium solution were studied for the determination of boron in cast iron, Fe-, Ni-and Fe-Ni-based alloys. A combination of 3000 mg 1-l nickel and 1000 mg I-' zirconium as chemical modifier and soaki

Determination of selenium and tellurium
Determination of selenium and tellurium in nickel and nickel/iron-based alloys by graphite furnace atomic absorption spectrometry with a nickel/palladium matrix modifier
✍ Benling Gong; Yongming Liu; Zhuanhe Li; Tiezheng Lin πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 475 KB

A nickel/palladium matrix modifier was proposed for the determination of selenium and tellurium in nickel and nickel/iron-based alloys by graphite furnace atomic absorption spectrometry without preseparation of the matrix. The effect of this matrix modifier was studied and it was found that a compos