𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Soybean Oil–Isosorbide-Based Waterborne Polyurethane–Urea Dispersions

✍ Scribed by Ying Xia; Prof. Richard C. Larock

Publisher
Wiley (John Wiley & Sons)
Year
2011
Tongue
English
Weight
271 KB
Volume
4
Category
Article
ISSN
1864-5631

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A series of soybean oil‐based amide diol‐isosorbide waterborne polyurethane–urea (PUU) dispersions have been successfully prepared, with amounts of isosorbide ranging from 0 to 20 wt % of the total diol content. The thermal and mechanical properties of the resulting PUU films have been characterized by dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, and mechanical testing. The results reveal that the glass transition temperature is increased with increased amounts of isosorbide, and the mechanical properties are improved significantly with the incorporation of isosorbide. For example, the Young’s modulus increases from 2.3 to 63 MPa and the ultimate tensile strength increases from 0.7 to 8.2 MPa when the isosorbide amount is increased from 0 to 20 wt %. The thermal stability decreases slightly with the incorporation of isosorbide. This work provides a new way of utilizing biorenewable materials, such as isosorbide and a soybean oil‐based amide diol, for the preparation of high‐performance polyurethane–urea coatings.

📜 SIMILAR VOLUMES

Castor-Oil-Based Waterborne Polyurethane
Castor-Oil-Based Waterborne Polyurethane Dispersions Cured with an Aziridine-Based Crosslinker
✍ Ying Xia; Richard C. Larock 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 269 KB

## Abstract Castor‐oil‐based anionic PU dispersions are post‐cured using a multiaziridine‐based crosslinker CX‐100. Thermal and mechanical properties of the resulting films are studied by DMA, DSC, TGA, and tensile tests. Mechanical properties are dramatically improved by the crosslinker. For examp

Rigid polyurethane foams based on soybea
Rigid polyurethane foams based on soybean oil
✍ Andrew Guo; Ivan Javni; Zoran Petrovic 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 149 KB 👁 3 views

Both HCFC-and pentane-blown rigid polyurethane foams have been prepared from polyols derived from soybean oil. The effect of formulation variables on foam properties was studied by altering the types and amounts of catalyst, surfactant, water, crosslinker, blowing agent, and isocyanate, respectively

Preparation and Properties of Aqueous Ca
Preparation and Properties of Aqueous Castor Oil-based Polyurethane–Silica Nanocomposite Dispersions through a Sol–Gel Process
✍ Ying Xia; Richard C. Larock 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 633 KB

## Abstract Waterborne castor oil‐based polyurethane–silica nanocomposites with the polymer matrix and silica nanoparticles chemically bonded have been successfully prepared through a sol–gel process. The formation of silica nanoparticles in water not only reinforces the resulting coatings, but als