Sound velocity and young's modulus in polyethylene
β Scribed by Davidse, P. D. ;Waterman, H. I. ;Westerdijk, J. B.
- Publisher
- John Wiley and Sons
- Year
- 1962
- Weight
- 500 KB
- Volume
- 59
- Category
- Article
- ISSN
- 0022-3832
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
The sound velocity was measured in bars for a number of lowβ and highβdensity polyethylene samples. The longitudinal oscillations in the bar were generated electrodynamically. It was observed that the sound velocity decreased somewhat with length. Therefore all sound velocity measurements were made in bars with the same length and diameter. After each measurement the density was determined also. It was observed that a linear relationship exists between sound velocity and density. The degree of polymerization has no direct influence on the sound velocity. Young's modulus obtained from sound velocity measurements was represented as a function of density also. Young's modulus obtained from sound velocity measurments proved to be about three times larger than values obtained from bending and tensile tests. The very small deformations involved in sound velocity measurements and the elimination of timeβdependent viscoelastic effects because of the oscillations are mentioned as the most likely reasons for this.
π SIMILAR VOLUMES
The frequency and amplitude dependences of the dynamic Young's modulus and loss factor of polystyrene (PS) and polyethylene (PE) foams usable for impact sound isolation in floating floors, measured at room temperature, in the frequency range of \(100-3000 \mathrm{~Hz}\), and in the range of strain a