๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Sound transmission between columns and floors in framed buildings

โœ Scribed by J.A. Steel; R.J.M. Craik

Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
729 KB
Volume
39
Category
Article
ISSN
0003-682X

No coin nor oath required. For personal study only.

โœฆ Synopsis

In framed buildings joints between columns and floor structures commonly occur. Beams at the top of columns, which support the floors, increases the complexity of the joint and can greatly influence the transmission characteristics. Impedances for composite beam/plate structures are used together with wave theories to obtain predictions for vibration transmission at such joints. Predictions of sound transmission at such joints are computed within a statistical energy analysis framework and good agreement is found between measured and predicted results.

๐Ÿ“œ SIMILAR VOLUMES

Sound Transmission Between Plates In Fra
Sound Transmission Between Plates In Framed Structures
โœ J.A. Steel ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 483 KB

In framed structures, rooms and corridors are formed by placing partitions between structural columns. This practice produces connections between plates which have a column running along the joint. If sound transmission at these joints is to be studied, then the effects of the joint column must be c

Estimation of air-borne and structure-bo
Estimation of air-borne and structure-borne sound transmission from machinery in buildings
โœ Eddy Gerretsen ๐Ÿ“‚ Article ๐Ÿ“… 1993 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 400 KB

Noise from machinery in buildings is caused by a mixture of air-borne and structure-borne sound. Relations are given for the estimation of sound levels in rooms due to air-borne and structure-borne sound transmission. For air-borne noise well-known quantities can be used to describe the source stren

STRUCTURE-BORNE SOUND TRANSMISSION FROM
STRUCTURE-BORNE SOUND TRANSMISSION FROM MACHINES IN BUILDINGS, PART 2: INDIRECT MEASUREMENT OF FORCE AND MOMENT AT THE MACHINE-RECEIVER INTERFACE OF A SINGLE POINT CONNECTED SYSTEM BY A RECIPROCAL METHOD
โœ S.H. Yap; B.M. Gibbs ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 313 KB

There is increasing evidence that moments are signiยฎcant contributors in machine induced structure-borne sound. Omission of these components in prediction can therefore lead to an underestimate of total power in some cases, although it is recognised that considering all transmission paths in predict