An auditory Iocalisation task involving 360 ยฐ azimuth was performed by three subjects in a large anechoic chamber. A single sound source of a rotating form was employed. Responses were measured to the nearest 10 ยฐ of azimuth. Under a control condition of 'no helmet', Iocalisation was within measurem
Sound isolation of a commercial free-field chamber
โ Scribed by S.P. Dowson
- Publisher
- Elsevier Science
- Year
- 1988
- Tongue
- English
- Weight
- 223 KB
- Volume
- 25
- Category
- Article
- ISSN
- 0003-682X
No coin nor oath required. For personal study only.
โฆ Synopsis
This paper gives an indication of the sound isolation that can be achieved in a single-walled free-fieM chamber based on one of the panel systems commonly used to construct noise enclosures in factories. Isolation exceeding 40 dB at frequencies of 200 Hz and above has been measured in a chamber lined with 0"4 m long absorbent wedges and having a free volume of 2"2 x 2.2 x 2.6 m between the wedge tips.
๐ SIMILAR VOLUMES
Before the adaptive cancellation performance of multichannel free-"eld acoustic systems could be evaluated in detail, it was considered prudent to establish "rst the performance of a single channel free-"eld cancelling system. The adaptive theory for this basic system, including the stability proces
## A BS TRA C T A method has been previously worked out by one of the authors, to measure the surface impedance of glasswools and plastic foams in normal and oblique incidence, in free field, with two microphones. Using an improved version of this method, surface impedance measurements of two soun
A theoretical comparison of a number of near-field acoustic error sensing strategies is undertaken for active control of harmonic free-field sound radiation. Error sensing strategies investigated include the minimization of acoustic potential energy density, acoustic kinetic energy density, total ac
The usual criterion of 10 % or less pressure reflection for lining materials of anechoic chambers is related to the real and imaginary parts of the specific acoustic impedance ratio, allowing some more direct relationship between the acoustic and physical properties of the lining material.