The removal of trace chlorinated hydrocarbons from water has been performed through poly(dimethylsiloxane), which had been fabricated by addition crosslinking reaction. The membrane had a more hydrophobic characteristic than that fabricated by a condensation reaction because it has no polar groups i
Sorption and permeation behaviors of a series of olefins and nitrogen through PDMS membranes
โ Scribed by Seung-Hak Choi; Jeong-Hoon Kim; Soo-Bok Lee
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 753 KB
- Volume
- 299
- Category
- Article
- ISSN
- 0376-7388
No coin nor oath required. For personal study only.
โฆ Synopsis
We have prepared three polydimethylsiloxane (PDMS) membranes by adjusting the mixing ratio of PDMS precursors -cross-linkable siloxane oligomer with vinyl groups and siloxane oligomer with silane groups -in the presence of Pt catalyst, and examined the separation performance of the resulting membranes for C 2 H 4 and N 2 . We have also investigated the sorption and permeation behavior of a series of olefins (e.g., C 2 H 4 , C 3 H 6 , and C 4 H 8 ) and nitrogen (N 2 ) over a pressures range of 1-20 atm and a temperature range of -20 to 50 โข C with the PDMS membranes prepared from the mixing ratio of 10:1. It was found that the solubility of olefins and their solubility selectivity over nitrogen were influenced strongly by the critical temperatures of the permeating gases and were enhanced greatly by increasing pressure or decreasing temperature. The permeability of olefins and their perm-selectivity over nitrogen in PDMS membranes showed critical-temperature-dependent rather than size-dependent order, over the operational ranges of pressure and temperature. With increasing feed pressure and/or decreasing temperature, the permeability of more condensable olefin gases increased, but nitrogen permeability changed only slightly and thus, olefin/nitrogen selectivity increased greatly.
๐ SIMILAR VOLUMES
The novel polyetherethersulfone (PES-C) prepared from phenol-phthalein in our institute is an amorphous, rigid, tough material with good mechanical properties over a wide temperature range. To improve its water vapor permeability for the application of gas drying, the PES-C was sulfonated with conce