✦ LIBER ✦

Some special features of cold deformation of the intermetallic compound Ni3Al with single-crystal and directed structures

✍ Scribed by A. S. Verin

Publisher: Springer US
Year: 1998
Tongue: English
Weight: 969 KB
Volume: 40
Category: Article
ISSN: 0026-0673
DOI: 10.1007/bf02467467

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Features of the microhardness near rando

Features of the microhardness near random and special type of boundaries in a Ni3Al intermetallic compound

✍ E.V. Konovalova; O.B. Perevalova; N.A. Koneva; E.V. Kozlov 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 340 KB

Various types of the grain boundaries were identified in intermetallic compound Ni 3 Al polycrystals. Deviations from the stoichiometric composition were determined, and microhardness was measured inside the grains and at grain boundaries. Microhardness near special boundaries is smaller than near r

Special features of phase formation in N

Special features of phase formation in Ni3Al intermetallic compound under directed crystallization with dosed feeding of the mother melt to the casting (part 1)

✍ A. S. Verin 📂 Article 📅 1998 🏛 Springer US 🌐 English ⚖ 950 KB

Certain features of the structure and an

Certain features of the structure and anisotropy in Ni3Al single crystals

✍ A. S. Verin 📂 Article 📅 1994 🏛 Springer US 🌐 English ⚖ 625 KB

Searching for feedback between the proce

Searching for feedback between the process parameters for directional solidification and the structure of Ni3Al single crystals

✍ A. S. Verin 📂 Article 📅 1994 🏛 Springer US 🌐 English ⚖ 807 KB

Fracture of specimens with single-crysta

Fracture of specimens with single-crystal and directed columnar structures from an alloy based on Ni3Al in the 20–1200°C temperature range

✍ A. S. Verin 📂 Article 📅 1995 🏛 Springer US 🌐 English ⚖ 772 KB