✦ LIBER ✦

Some effects of emulsion polymerization conditions on molecular polydispersity and rheological properties of poly(methyl methacrylate)

✍ Scribed by M. S. Guillod; R. G. Bauer

Publisher: John Wiley and Sons
Year: 1972
Tongue: English
Weight: 334 KB
Volume: 16
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1972.070160614

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of reaction conditions on poly(m

Effects of reaction conditions on poly(methyl methacrylate) polymerized by living radical polymerization with iniferter

✍ A. Kongkaew; J. Wootthikanokkhan 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 128 KB 👁 2 views

Living radical polymerization of methyl methacrylate (MMA) through the use of benzyl diethyl dithiocarbamate (BDC) was studied. The aim was to investigate the role of the concentration, BDC-to-MMA mol ratio, and reaction time upon the molecular weight, polydispersity, and conversion of the product.

Effect of filler type and concentration

Effect of filler type and concentration on some mechanical and electrical properties of poly(methyl methacrylate)

✍ A. B. Moustafa; A. Faizalla; B. M. Abd El Hady 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 132 KB 👁 1 views

Polymer composites of poly(methyl methacrylate) (PMMA) and cuprous oxide (Cu 2 O), magnesium oxide (MgO), copper biphthalocyanine, iron (II) chloride (FeCl 2 ), and iron metal were prepared by different filler-to-polymer percentages of 10, 20, 30, 40, and 50%. With increasing filler concentration, b

Effect of methacrylic acid:Methyl methac

Effect of methacrylic acid:Methyl methacrylate monomer ratios on polymerization rates and properties of polymethyl methacrylates

✍ Chen, T. ;Kusy, R. P. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 159 KB 👁 2 views

Five binary formulations were prepared from methyl methacrylate (MMA) and methacrylic acid (MAA) monomers, and six ternary formulations were prepared from polysols of 30% wt polymethyl methacrylate (PMMA)/MMA and MAA. Using thermal analyses (DSC and TGA) the polymerization kinetics, condition of pos

Emulsion polymerization of tetrafluoroet

Emulsion polymerization of tetrafluoroethylene: effects of reaction conditions on the polymerization rate and polymer molecular weight

✍ C. U. Kim; J. M. Lee; S. K. Ihm 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 366 KB 👁 2 views

The emulsion polymerization of tetrafluoroethylene (TFE) was carried out in a semibatch reactor using a chemical initiator (ammonium persulfate) and a fluorinated surfactant (FC-143). The effects of the reaction condition were investigated though the polymerization rate, molecular weight of polytetr

Effect of residual monomer content on so

Effect of residual monomer content on some properties of a poly(methyl methacrylate)-based bone cement

✍ C. I. Vallo; P. E. Montemartini; T. R. Cuadrado 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB 👁 2 views

Through this article, the degree of polymerization attainable in a commercial acrylic bone cement based on poly(methyl methacrylate) (PMMA) was investigated by differential scanning calorimetry (DSC) and gas chromatography (GC). The results obtained revealed a marked dependence between the maximum m

Effect of a filler on the rheological an

Effect of a filler on the rheological and mechanical properties of the liquid-crystalline polyester–poly(methyl methacrylate) blends

✍ V. F. Shumsky; I. P. Getmanchuk; Y. S. Lipatov 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 195 KB 👁 2 views

The rheological and mechanical properties of the blends of liquid-crystalline polyester (LCP) and poly(methyl methacrylate) (PMMA) filled with aluminum borate whiskers have been studied. It was established the combined action of reinforcing LCP and filler onto the property of PMMA matrix leads to ma