and the time for release will move up as burning temperature increases. In addition, sulphur release during coal combustion can be controlled by adding calcium-based sorbent. However, different sorbents should be chosen according to sulphur existence pattern in coal. 02/01952 Synthesis and characte
Some aspects of characterisation, utilisation and environmental effects of fly ash
โ Scribed by Rajalaxmi Mohapatra; J Rajagopala Rao
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 2001
- Tongue
- English
- Weight
- 219 KB
- Volume
- 76
- Category
- Article
- ISSN
- 0268-2575
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The purpose of grout injection is to increase the compactness of the masonry and its injection optimization is a task of major importance for masonry consolidation. Fresh grout properties seem to be as important as the ones in the hardened state since grout consistency is an essential characteristic
The authors carried out catalytic hydrocracking of a residue from deasphalting a syn-crude, obtained by direct coal liquefaction of a subbituminous Spanish coal, at different temperatures and reaction times. Kinetic study of the cracking reaction has been performed. The viscosity, coke content, boil
The effectiveness, K, of a fly ash can be defined as the ratio of the amount of cement replaced to the amount of fly ash added, provided the specified requirements of the concrete are maintained. It is generally assumed that the effectiveness of a fly ash can be treated as a constant. This paper pre