✦ LIBER ✦

Solid/vapour sorption heat transformer: Design and performance

✍ Scribed by Wim G. Haije; Jakobert B.J. Veldhuis; Simon F. Smeding; Ruud J.H. Grisel

Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 535 KB
Volume: 27
Category: Article
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2006.10.022

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Performance analysis of a vapour absorpt

Performance analysis of a vapour absorption heat transformer with different working fluid combinations

✍ V.M. Kripalani; S. Srinavasa Murthy; M.V. Krishna Murthy 📂 Article 📅 1984 🏛 Elsevier Science ⚖ 619 KB

An absorption heat-transformer and its o

An absorption heat-transformer and its optimal performance

✍ Xiaoyong Qin; Lingen Chen; Fengrui Sun; Chih Wu 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 277 KB

Design and performance characteristics o

Design and performance characteristics of sorption pumps

✍ P Vijendran; CVG Nair 📂 Article 📅 1971 🏛 Elsevier Science 🌐 English ⚖ 476 KB

Heat transformer with self-circulation:

Heat transformer with self-circulation: design and preliminary operational data

✍ K Eriksson; Å Jernqvist 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 579 KB

Experimental performance of ternary solu

Experimental performance of ternary solutions in an absorption heat transformer

✍ R. M. Barragan; V. M. Arellano; C. L. Heard; R. Best 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 233 KB 👁 2 views

In this work, results from experiments with ternary solutions in an absorption heat transformer are presented. The experiments were performed under controlled conditions using water/lithium chloride/zinc chloride and water/calcium chloride/zinc chloride solutions as working pairs. The results showed

Performance of multi-bed sorption heat p

Performance of multi-bed sorption heat pump systems

✍ W. ZHENG; W. M. WOREK; G. NOWAKOWSKI 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 714 KB

Traditional designs of solid-sorbent sorption heat pumps consist of two beds, where one bed is regenerating while the other is adsorbing. The performance of traditional solid sorption heat pumps can be improved by designing the system with multiple beds. Employing the concept of multi-beds, the beds