𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Solid circulation studies in a gas solid fluid bed ag

✍ Scribed by H. Masson

Publisher
Elsevier Science
Year
1978
Tongue
English
Weight
241 KB
Volume
33
Category
Article
ISSN
0009-2509

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Critical Bed Height for Solid Circulatio
Critical Bed Height for Solid Circulation in a Compartmented Gas-Fluidized Bed
✍ B. Bhattacharya; D. Sathiyamoorthy; V. Govardhana Rao; S. P. Mahajan πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 405 KB πŸ‘ 2 views

The influence of design and operating parameters on minimum upstream bed height required for steady solid circulation across a compartmented gas-fluidized bed has been studied. The partition plate in the compartmented bed is fitted with two pairs of Vvalve and riser with orifices in them. Silica san

Solid circulation in a liquid spout-flui
Solid circulation in a liquid spout-fluid bed with multi draft tubes
✍ F. Figen Ar; B. ZΓΌhtΓΌ Uysal πŸ“‚ Article πŸ“… 1998 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 238 KB πŸ‘ 1 views

Considering the application of the technique of liquid spouting with multi draft tubes to heat exchangers, the solids circulation rate was studied both experimentally and theoretically. It was found that the solids circulation rate increased with the liquid velocity and with the amount of solids use

Radial profiles of solids loading and fl
Radial profiles of solids loading and flux in a gas–solid circulating fluidized bed
✍ P.R. Tortora; S.L. Ceccio; A.G. Mychkovsky; T.J. O'Hern; J.R. Torczynski πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 676 KB

An electrical-impedance tomography (EIT) system has been developed to non-invasively measure radial voidage profiles in the riser of a pilotscale circulating fluidized bed (CFB), yielding quantitative information that is validated by comparison to a gamma-densitometry tomography (GDT) system. EIT an