## Abstract The portable surface capacitance insertion probe was used to measure the __in situ__ water content of near surface soil layers. The probe readings were calibrated against gravimetric samples collected over a wide range of water contents, and were found to be very closely correlated. The
Soil Water Content Measurement with a High-Frequency Capacitance Sensor
β Scribed by C.M.K. Gardner; T.J. Dean; J.D. Cooper
- Publisher
- Elsevier Science
- Year
- 1998
- Tongue
- English
- Weight
- 306 KB
- Volume
- 71
- Category
- Article
- ISSN
- 0021-8634
No coin nor oath required. For personal study only.
β¦ Synopsis
The calibration of a capacitance sensor (operating at 80-150 MHz) for monitoring soil water content is described. The capacitance of two electrodes inserted into soil is used to measure the dielectric properties of the soil, soil water content being the principal factor influencing these properties. A probe designed for measuring surface soil water content was used in laboratory trials to determine what other soil factors influence capacitance measurement by the sensor. The probe was first calibrated with known dielectrics and the results are presented in terms of relative permittivity . Trials demonstrated that well-defined relationships between and can be obtained for individual soils. A comparison of measurements made in several soils showed that differences in dry bulk density were important but clay and organic matter content were not. The measurements obtained, and their dependence on and density, accord well with measurements by other methods.
π SIMILAR VOLUMES
## Abstract Timeβdomain reflectometry (TDR) sensors have been widely used in many fields for measurement of soil water content. However, few TDR sensors have been used in a hyperβarid environment (e.g. less than 0Β·05 m^3^ m^β3^), and such sensor applicability is not yet confirmed. In this study we