Soft-lithography defined coaxial-like transmission line with 2.5 dimensional features
✍ Scribed by Nick J. Farcich; P. M. Asbeck
- Book ID
- 102518045
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 369 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel coaxial‐like transmission line is presented in this article that offers many of the advantages of single‐mode waveguides but is implemented using conventional lithographic methods. On the basis of full‐wave simulations, a prototype “2.5‐D MicroCoax” was fabricated using soft‐lithography techniques with polydimethylsiloxane serving as the substrate material. In addition to width and gap dimensional control, the structure offers an additional degree of freedom by changing the center conductor's height, thus controlling the characteristic impedance and phase velocity—all without having to compromise performance. Simulation and test results confirm the design's single‐mode, low‐loss operation up to the de‐embedded frequency range of 12.0 GHz. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2827–2830, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23798