✦ LIBER ✦

Slow crack growth of blends of high density and linear low density polyethylenes as influenced by morphology

✍ Scribed by Zhiqiang Zhou; Norman Brown

Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 432 KB
Volume: 35
Category: Article
ISSN: 0032-3861
DOI: 10.1016/0032-3861(94)90537-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of blending high-density and

The effect of blending high-density and linear low-density polyethylenes on slow crack growth

✍ Zhiqiang Zhou; Xici Lu; Norman Brown 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 374 KB

Effects of γ-irradiation on the morpholo

Effects of γ-irradiation on the morphology and slow crack growth in high-density polyethylene

✍ Xici Lu; Norman Brown 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 449 KB 👁 1 views

The effects of g-irradiation were measured in a HDPE and in the resin after it was recrystallized. The fracture mode of the initial material transformed from crazing to complete brittle failure at a critical dose. The failure mode of the recrystallized material transformed from crazing to shear defo

Flexural and impact properties of high-d

Flexural and impact properties of high-density polyethylene/linear low-density polythylene blend

✍ A. K. Gupta; S. K. Rana; B. L. Deopura 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 588 KB

A study of crystallisation behaviour and

A study of crystallisation behaviour and compatibility of high-density polyethylene/linear low-density polyethylene blends

✍ M. Pracella; E. Benedetti; F. Galleschi 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 898 KB

Blend of high-density polyethylene and a

Blend of high-density polyethylene and a linear low-density polyethylene with compositional-invariant mechanical properties

✍ S. K. Rana 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 103 KB 👁 2 views

Mechanical properties and morphology of

Mechanical properties and morphology of polylactide, linear low-density polyethylene, and their blends

✍ Gursewak Singh; H. Bhunia; Anita Rajor; R. N. Jana; Veena Choudhary 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 752 KB

## Abstract Melt blending of linear low density polyethylene (LLDPE) and polylactide (PLA) was performed in an extrusion mixer with post extrusion blown film attachment with and without compatibilizer‐grafted low density polyethylene maleic anhydride. The blend compositions were optimized for tensi