𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Sliding wear performance of polyamide 6–clay nanocomposites in water

✍ Scribed by G. Srinath; R. Gnanamoorthy

Book ID
108104104
Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
399 KB
Volume
67
Category
Article
ISSN
0266-3538

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Applying the Traditional Solution Melt P
Applying the Traditional Solution Melt Polymerization for the in situ Intercalation of Polyamide 6.6-Clay Nanocomposites
✍ Anastasia C. Boussia; Stamatina N. Vouyiouka; Constantine D. Papaspyrides 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 584 KB

## Abstract The traditional PA 6.6 production route, i.e. solution melt polymerization followed by extrusion, is applied to the in situ intercalation of PA 6.6/clay nanocomposites. Organoclays of different types are tested and the derived nanocomposites are thoroughly characterized in terms of mole

Water transport properties of polyamide
Water transport properties of polyamide 6 based nanocomposites prepared by melt blending: On the importance of the clay dispersion state on the water transport properties at high water activity
✍ E. Picard; J.-F. Gérard; E. Espuche 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 804 KB

Blown PA6-based nanocomposite films were prepared and studied for a wide range of montmorillonite content (from 0 to 13 wt% of inorganic layers). The crystalline morphology of the polyamide matrix was shown to be only slightly dependent on the filler loading, allowing to discuss the nanocomposites w