In the present study, the dry sliding wear characteristics of AZ31B/Al 2 O 3 and AZ31B/Al 2 O 3 -(1-3) wt % Ca nanocomposite were investigated under different tribological conditions. Experiments were conducted using a pin-on-disc configuration against a hardened tool steel counterface over a range
Sliding wear behaviour of SiC–Al2O3 nanocomposites
✍ Scribed by S. Bajwa; W.M. Rainforth; W.E. Lee
- Book ID
- 108299458
- Publisher
- Elsevier Science
- Year
- 2005
- Tongue
- English
- Weight
- 952 KB
- Volume
- 259
- Category
- Article
- ISSN
- 0043-1648
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
A composite consisting of 30 vol.% MoSi 2 particles in SiC matrix was prepared by liquid phase sintering carried out with the aid of small additions of Al 2 O 3 and Y 2 O 3 and then submitted to dry sliding tests using alumina as the counterfacing body under different conditions of applied load (15,
The self-crack-healing ability was systematically studied using flexural strength measurement of beams containing a semi-elliptical surface crack made by Vickers indenter. Beams of Al 2 O 3 /SiC ceramic nanocomposite with a good self-crack-healing ability predetermined for four-point and three-point