## Abstract A dual‐frequency rectangular microstrip antenna with a pair of π‐shaped narrow slots close to the nonradiating edges of the patch is experimentally studied. By varying the length and spacing of the two arms of each π‐shaped slot, the proposed antenna provides a tunable frequency ratio f
Single-feed dual-frequency rectangular microstrip antenna with a π-shaped slot
✍ Scribed by Chen, H.-M.
- Book ID
- 114455100
- Publisher
- The Institution of Electrical Engineers
- Year
- 2001
- Tongue
- English
- Weight
- 471 KB
- Volume
- 148
- Category
- Article
- ISSN
- 1350-2417
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
No¨el design of a dual-frequency triangular microstrip antenna with a V-shaped slot is proposed and experimentally studied. By selecting suitable dimensions of the V-shaped slot, dual-frequency operation with the frequency ratio ranging from 1.488 to 1.834 has been obtained using a single probe feed
By embedding a pair of comb-shaped slots close to the nonradiating edges of a rectangular microstrip antenna, a no¨el dualfrequency operation of microstrip antennas using a single probe feed is proposed and experimentally studied. The two operating frequencies ha¨e the same polarization planes and s
region W. The effect of the dimensions W and H is practis w Ž .x cally negligible Fig. 3 c . A variation of the dimension W with respect to its nominal value, according to whether an increase or decrease can be advantageous or disadvantageous, since it must be remembered that a phase velocity in pra
Figure Reflection coefficient as a function of the frequency and the resolution interpolation conductivity was chosen in order to obtain a normal theoretical reflection coefficient of 0.001% s y100 dB. Results for the reflection coefficient as a function of frequency are presented in Figure . ## 6
## A no¨el dual-frequency design of a single-layer, single-feed circular microstrip antenna with an open-ring slot s demonstrated. The open-ring slot is embedded close to the boundary of the circular patch, and has a small spacing between the two open ends of the slot. By selecting suitable widths o